Nello Rontani - Luca Martinelli
Diamond rubber polishers use with aesthetic reconstructions of the V class
caries
Forward
One of the biggest difficulties while finishing and
glazing the V class reconstruction is the respect of the mucosa, which most of
the times is involved by the burs, discs or rubber polishers for composite.
5^ class extended on 23
Strategy
In order to avoid trauma and bleeding of the tissues
we thought to finish and glaze the reconstruction using only diamond rubber
polishers, which means without using any other rotary instrument.
In particular, we used micro-flame shape.
Diamond Micro flames
Diamond rubber polishers are generally used for
ceramic and metal. In this case, the peculiarity of those rotaries have been
considered adequate to reach the aesthetic quality and respect of the tissues
target.
We have tested different rubber polishers present in
the market.
For this procedure, the best have proved to be the
ones produced by the Italian company Quasar Dental Equipment.
They have an integral, saturated compound, which means
that you can find diamond powder into the whole compound until the axel. They
are particularly hard, resistant with a strong anchoring between the compound
and the axel specifically studied so that the rubber head won’t separate from
the axle, neither if forced.
Kit –Micro Fiamma Diamond codice QR K 06
For the process we have done four light steps, without any pressure or peculiar operations on the surface. It was even possible to make a modeling which simulates the tooth root anatomy as if it was just exposed by the gum.
After the last polymerization we have used the red
rubber, polishing and giving a first modeling
Coarse grain - red
The third, yellow and the forth, gray ones were useful
to build a perfect glazing on the reconstruction without provoking any bleeding
of the mucosa.
The result of this “experimentation” has been fully
satisfying .
Summary
The execution of V
class reconstructions can cause gum bleeding and so micro trauma of the tissue.
The use of diamond rubber polishers for the finishing
and glazing of the aesthetic reconstructions made with composite materials,
even if they were born to be used with ceramic and metal, is a success strategy.
After the end of the operation, the result has been
fully satisfying for at least three reasons:
1- The final aesthetic of the reconstruction
glazing was excellent;
2- The finishing and bright grazing
of the reconstruction has been particularly easy to carry out;
3- The most important thing to
underline is that we could work in the cervical area without provoking suffering
or bleeding of the mucosa.
_________________
A special thank to
Dr. Nello Rontani by Rontani Dental office
from BOZZANO - MASSAROSA - Lucca - ITALY
Where the procedure has been done
Nessun commento:
Posta un commento
Nota. Solo i membri di questo blog possono postare un commento.